Product Description
Product Details
Product Features
PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.
Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.
Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.
Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.
Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.
Model List
Technical Parameters Of PM VSD Screw Air Compressor -JXPMS Series
This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional
| Model | Pressure (MPa) |
Pressure (psi) |
FAD (m3/min) |
FAD (CFM) |
Power (kW/hp) |
Dimension (mm) |
Noise (dB) |
Weight (Kg) |
Pipe Diameter |
| JX-10APMS | 0.8 | 116 | 1.1 | 38.8 | 7.5/ 10 | 800*600*860 | ≤63±2 | 112 | G1/2 |
| 1 | 145 | 0.9 | 31.8 | ||||||
| 1.3 | 188 | 0.7 | 24.7 | ||||||
| JX-15APMS | 0.8 | 116 | 1.7 | 60.0 | 11/ 15 | 1000*750*1070 | ≤65±2 | 195 | G3/4 |
| 1 | 145 | 1.6 | 56.5 | ||||||
| 1.3 | 188 | 1 | 35.3 | ||||||
| JX-20APMS | 0.8 | 116 | 2.3 | 81.2 | 15/ 20 | 1000*750*1070 | ≤65±2 | 200 | G3/4 |
| 1 | 145 | 2.1 | 74.2 | ||||||
| 1.3 | 188 | 1.7 | 60.0 | ||||||
| JX-30APMS | 0.8 | 116 | 3.4 | 120.1 | 22/ 30 | 1100*850*1110 | ≤72±2 | 315 | G1 |
| 1 | 145 | 3.2 | 113.0 | ||||||
| 1.3 | 188 | 2.5 | 88.3 | ||||||
| JX-40APMS | 0.8 | 116 | 4.7 | 166.0 | 30/ 40 | 1100*850*1110 | ≤75±2 | 320 | G1 |
| 1 | 145 | 4 | 141.2 | ||||||
| 1.3 | 188 | 3.1 | 109.5 | ||||||
| JX-50APMS | 0.8 | 116 | 6.4 | 226.0 | 37/ 50 | 1200*1000*1350 | ≤77±2 | 450 | G1 1/2 |
| 1 | 145 | 5.2 | 183.6 | ||||||
| 1.3 | 188 | 4.7 | 166.0 | ||||||
| JX-60APMS | 0.8 | 116 | 7.3 | 257.8 | 45/ 60 | 1200*1000*1350 | ≤78±2 | 460 | G1 1/2 |
| 1 | 145 | 6.6 | 233.0 | ||||||
| 1.3 | 188 | 5.5 | 194.2 | ||||||
| JX-75APMS | 0.8 | 116 | 9.4 | 331.9 | 55/ 75 | 1500*1230*1550 | ≤80±2 | 810 | G2 1/2 |
| 1 | 145 | 7.2 | 254.2 | ||||||
| 1.3 | 188 | 6.2 | 218.9 | ||||||
| JX-100APMS | 0.8 | 116 | 12.3 | 434.3 | 75/ 100 | 1500*1230*1550 | ≤80±2 | 820 | G2 1/2 |
| 1 | 145 | 10.8 | 381.3 | ||||||
| 1.3 | 188 | 9.1 | 321.3 | ||||||
| JX-125APMS | 0.8 | 116 | 15.2 | 536.7 | 90/ 125 | 2100*1400*1650 | ≤82±2 | 1650 | G2 1/2 |
| 1 | 145 | 12.3 | 434.3 | ||||||
| 1.3 | 188 | 11.4 | 402.5 | ||||||
| JX-150APMS | 0.8 | 116 | 19.9 | 702.7 | 110/ 150 | 2250*1510*1850 | ≤82±2 | 2300 | DN65 |
| 1 | 145 | 16.3 | 575.6 | ||||||
| 1.3 | 188 | 14.5 | 512.0 | ||||||
| JX-180APMS | 0.8 | 116 | 23 | 812.1 | 132/180 | 2250*1510*1850 | ≤82±2 | 2500 | DN65 |
| 1 | 145 | 19.7 | 695.6 | ||||||
| 1.3 | 188 | 16 | 565.0 | ||||||
| JX-220APMS | 0.8 | 116 | 28.5 | 1006.3 | 160/220 | 3250*2100*2200 | ≤84±2 | 4000 | DN100 |
| 1 | 145 | 22.8 | 805.1 | ||||||
| 1.3 | 188 | 21.5 | 759.2 | ||||||
| JX-250APMS | 0.8 | 116 | 30 | 1059.3 | 185/250 | 3250*2100*2200 | ≤84±2 | 4200 | DN100 |
| 1 | 145 | 27 | 953.4 | ||||||
| 1.3 | 188 | 23 | 812.1 | ||||||
| JX-270APMS | 0.8 | 116 | 32.5 | 1147.6 | 200/270 | 3550*2300*2300 | ≤86±2 | 5300 | DN125 |
| 1 | 145 | 29.2 | 1031.1 | ||||||
| 1.3 | 188 | 25.5 | 900.4 | ||||||
| JX-300APMS | 0.8 | 116 | 38 | 1341.8 | 220/300 | 3550*2300*2300 | ≤86±2 | 5800 | DN125 |
| 1 | 145 | 33 | 1165.2 | ||||||
| 1.3 | 188 | 28.8 | 1016.9 | ||||||
| JX-350APMS | 0.8 | 116 | 44 | 1553.6 | 250/350 | 3760*2260*2200 | ≤86±2 | 6300 | DN125 |
| 1 | 145 | 41 | 1447.7 | ||||||
| 1.3 | 188 | 35.5 | 1253.5 |
Presentation of all aspects
In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.
Our factory utilizes advanced machinery to craft high-quality air compressors. Laser cutting and bending machines shape and form the components, while welding machines build a sturdy structure. Spray booths, pipe cutters, and benders refine the units, and test equipment ensures they meet our strict standards, all supported by efficient forklift handling. This sophisticated setup guarantees precision, durability, and reliability in our products.
Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.
Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.
Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.
Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.
At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
.webp)
What is the impact of humidity on compressed air quality?
Humidity can have a significant impact on the quality of compressed air. Compressed air systems often draw in ambient air, which contains moisture in the form of water vapor. When this air is compressed, the moisture becomes concentrated, leading to potential issues in the compressed air. Here’s an overview of the impact of humidity on compressed air quality:
1. Corrosion:
High humidity in compressed air can contribute to corrosion within the compressed air system. The moisture in the air can react with metal surfaces, leading to rust and corrosion in pipes, tanks, valves, and other components. Corrosion not only weakens the structural integrity of the system but also introduces contaminants into the compressed air, compromising its quality and potentially damaging downstream equipment.
2. Contaminant Carryover:
Humidity in compressed air can cause carryover of contaminants. Water droplets formed due to condensation can carry particulates, oil, and other impurities present in the air. These contaminants can then be transported along with the compressed air, leading to fouling of filters, clogging of pipelines, and potential damage to pneumatic tools, machinery, and processes.
3. Decreased Efficiency of Pneumatic Systems:
Excessive moisture in compressed air can reduce the efficiency of pneumatic systems. Water droplets can obstruct or block the flow of air, leading to decreased performance of pneumatic tools and equipment. Moisture can also cause problems in control valves, actuators, and other pneumatic devices, affecting their responsiveness and accuracy.
4. Product Contamination:
In industries where compressed air comes into direct contact with products or processes, high humidity can result in product contamination. Moisture in compressed air can mix with sensitive products, leading to quality issues, spoilage, or even health hazards in industries such as food and beverage, pharmaceuticals, and electronics manufacturing.
5. Increased Maintenance Requirements:
Humidity in compressed air can increase the maintenance requirements of a compressed air system. Moisture can accumulate in filters, separators, and other air treatment components, necessitating frequent replacement or cleaning. Excessive moisture can also lead to the growth of bacteria, fungus, and mold within the system, requiring additional cleaning and maintenance efforts.
6. Adverse Effects on Instrumentation:
Humidity can adversely affect instrumentation and control systems that rely on compressed air. Moisture can disrupt the accuracy and reliability of pressure sensors, flow meters, and other pneumatic instruments, leading to incorrect measurements and control signals.
To mitigate the impact of humidity on compressed air quality, various air treatment equipment is employed, including air dryers, moisture separators, and filters. These devices help remove moisture from the compressed air, ensuring that the air supplied is dry and of high quality for the intended applications.
.webp)
How do you maintain proper air quality in compressed air systems?
Maintaining proper air quality in compressed air systems is essential to ensure the reliability and performance of pneumatic equipment and the safety of downstream processes. Here are some key steps to maintain air quality:
1. Air Filtration:
Install appropriate air filters in the compressed air system to remove contaminants such as dust, dirt, oil, and water. Filters are typically placed at various points in the system, including the compressor intake, aftercoolers, and before point-of-use applications. Regularly inspect and replace filters to ensure their effectiveness.
2. Moisture Control:
Excessive moisture in compressed air can cause corrosion, equipment malfunction, and compromised product quality. Use moisture separators or dryers to remove moisture from the compressed air. Refrigerated dryers, desiccant dryers, or membrane dryers are commonly employed to achieve the desired level of dryness.
3. Oil Removal:
If the compressed air system utilizes oil-lubricated compressors, it is essential to incorporate proper oil removal mechanisms. This can include coalescing filters or adsorption filters to remove oil aerosols and vapors from the air. Oil-free compressors eliminate the need for oil removal.
4. Regular Maintenance:
Perform routine maintenance on the compressed air system, including inspections, cleaning, and servicing of equipment. This helps identify and address any potential issues that may affect air quality, such as leaks, clogged filters, or malfunctioning dryers.
5. Air Receiver Tank Maintenance:
Regularly drain and clean the air receiver tank to remove accumulated contaminants, including water and debris. Proper maintenance of the tank helps prevent contamination from being introduced into the compressed air system.
6. Air Quality Testing:
Periodically test the quality of the compressed air using appropriate instruments and methods. This can include measuring particle concentration, oil content, dew point, and microbial contamination. Air quality testing provides valuable information about the effectiveness of the filtration and drying processes and helps ensure compliance with industry standards.
7. Education and Training:
Educate personnel working with compressed air systems about the importance of air quality and the proper procedures for maintaining it. Provide training on the use and maintenance of filtration and drying equipment, as well as awareness of potential contaminants and their impact on downstream processes.
8. Documentation and Record-Keeping:
Maintain accurate records of maintenance activities, including filter replacements, drying system performance, and air quality test results. Documentation helps track the system’s performance over time and provides a reference for troubleshooting or compliance purposes.
By implementing these practices, compressed air systems can maintain proper air quality, minimize equipment damage, and ensure the integrity of processes that rely on compressed air.
.webp)
Are there portable air compressors available for home use?
Yes, there are portable air compressors specifically designed for home use. These portable models offer convenience, versatility, and ease of use for various tasks around the house. Here are some key points about portable air compressors for home use:
1. Compact and Lightweight: Portable air compressors are typically compact and lightweight, making them easy to transport and store. They are designed with portability in mind, allowing homeowners to move them around the house or take them to different locations as needed.
2. Electric-Powered: Most portable air compressors for home use are electric-powered. They can be plugged into a standard household electrical outlet, eliminating the need for gasoline or other fuel sources. This makes them suitable for indoor use without concerns about emissions or ventilation.
3. Versatile Applications: Portable air compressors can be used for a wide range of home applications. They are commonly used for inflating tires, sports equipment, and inflatable toys. They are also handy for operating pneumatic tools such as nail guns, staplers, and paint sprayers. Additionally, portable air compressors can be used for cleaning tasks, powering airbrushes, and other light-duty tasks around the house.
4. Pressure and Capacity: Portable air compressors for home use typically have lower pressure and capacity ratings compared to larger industrial or commercial models. They are designed to meet the needs of common household tasks rather than heavy-duty applications. The pressure and capacity of these compressors are usually sufficient for most home users.
5. Oil-Free Operation: Many portable air compressors for home use feature oil-free operation. This means they do not require regular oil changes or maintenance, making them more user-friendly and hassle-free for homeowners.
6. Noise Level: Portable air compressors designed for home use often prioritize low noise levels. They are engineered to operate quietly, reducing noise disturbances in residential environments.
7. Cost: Portable air compressors for home use are generally more affordable compared to larger, industrial-grade compressors. They offer a cost-effective solution for homeowners who require occasional or light-duty compressed air applications.
When considering a portable air compressor for home use, it’s important to assess your specific needs and tasks. Determine the required pressure, capacity, and features that align with your intended applications. Additionally, consider factors such as portability, noise level, and budget to choose a suitable model that meets your requirements.
Overall, portable air compressors provide a practical and accessible compressed air solution for homeowners, allowing them to tackle a variety of tasks efficiently and conveniently within a home setting.
<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China best High Performance Oil Luricated Variable Frequency Direct Drive Screw Air Compressor with Good quality”><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China best High Performance Oil Luricated Variable Frequency Direct Drive Screw Air Compressor with Good quality”>
editor by lmc 2024-10-08