Category Archives: Uncategorized

China Best Sales Single-Stage Low Pressure 75HP Oil Lubricated Rotary Pm VSD Screw Air Compressor arb air compressor

Product Description

Product Details

Product Features

PM VSD screw air compressor, is a type of screw air compressor that employs permanent magnet synchronous motor (PMSM) and frequency conversion speed control technology.
The main advantages of this screw air compressors are:
Energy saving and high efficiency: Compared with traditional asynchronous motors, permanent magnet inverter motors have higher energy utilization efficiency, and can maintain high power utilization and output power stability under both full load and partial load conditions.

Stable operation: the frequency converter can control a smoother start of the compressor, reduce the impact on the supporting power grid and the mechanical wear and tear of the machine itself, to extend the service life of the equipment.

Low noise: inverter operation can effectively reduce the noise level of the compressor at low load.

Intelligent: Equipped with an intelligent control system, the permanent magnet inverter motor can accurately control the compressor’s working status, distribute the load and achieve more efficient energy use.

Lower maintenance costs: when start-up, frequency conversion air compressor reduces the impact on the power grid and mechanical parts of the equipment, the service life is greatly increased of the compressor’s parts (the motor contactor, motor bearings, host bearings). Energy efficient controller makes the air compressor be in the loading state when at most working time, the relevant solenoid valves and pneumatic components have greatly reduced the number of actions, the failure rate of electrical and mechanical parts is greatly reduced.

Model List

Low Voltage Permanent Frequency Converter Screw Air Compressor -JXLPM Series

This series adopt direct drive mode and variable frequency startup, the standard power supply is 380V/50Hz, and 110V~480V voltage and 60Hz is Optional

Model	Pressure (MPa)	Pressure (psi)	FAD (m³/min)	FAD (CFM)	Power (kW/hp)	Dimension (mm)	Weight (Kg)	Pipe Diameter
JXL-50APM	0.3	44	11.8	416.7	37/50	210016001650	1300	DN80
	0.4	58	10	353.1		210016001650	1300	DN80
	0.5	73	8	282.5		170012001550	900	G2
JXL-60APM	0.2	29	17	600.3	45/60	250016501900	2500	DN100
	0.3	44	13.5	476.7		210013001650	1500	DN80
	0.4	58	11.8	416.7		210013001650	1500	DN80
	0.5	73	10	353.1		170012001550	950	G2
JXL-75APM	0.2	29	20.5	723.9	55/75	250016501900	2900	DN125
	0.3	44	17	600.3		250016501900	2900	DN100
	0.4	58	14.2	501.4		210013001650	1600	DN80
	0.5	73	13.3	469.6		210013001650	1550	G2
JXL-100APM	0.2	29	27	953.4	75/100	250016501900	3000	DN125
	0.3	44	24	847.4			3000	DN100
	0.4	58	20.5	723.9			2900	DN100
	0.5	73	17	600.3		210013001650	1550	G2
JXL-125APM	0.2	29	34	1200.5	90/125	300019001950	3100	DN125
	0.3	44	28	988.7		250016501900	3100	DN100
	0.4	58	24	847.4			3000	DN100
	0.5	73	20	706.2			2950	DN80
JXL-150APM	0.2	29	43	1518.3	110/150	360022002200	5300	DN200
	0.3	44	34	1200.5		300019001950	4000	DN125
	0.4	58	29.6	1045.2			3500	DN100
	0.5	73	24	847.4			3200	DN80
JXL-180APM	0.2	29	52	1836.1	132/180	360022002200	5800	DN200
	0.3	44	42	1483.0		300019001950	4300	DN125
	0.4	58	33	1165.2			4100	DN100
	0.5	73	30.5	1077.0			3700	DN80
JXL-220APM	0.2	29	60	2118.6	160/220	360022002200	6500	DN200
	0.3	44	50	1765.5		360022002200	6200	DN200
	0.4	58	44	1553.6		300019001950	4300	DN100
	0.5	73	34	1200.5		300019001950	4000	DN100

Presentation of all aspects

In our product showcase, the air compressor stands as a testament to our commitment to precision work for better quality. Every component, from the robust motor to the intricate valves, is crafted with meticulous attention to detail in our specialized workshops.

Our factory utilizes advanced machinery to craft high-quality air compressors. Laser cutting and bending machines shape and form the components, while welding machines build a sturdy structure. Spray booths, pipe cutters, and benders refine the units, and test equipment ensures they meet our strict standards, all supported by efficient forklift handling. This sophisticated setup guarantees precision, durability, and reliability in our products.

Our air compressor production begins with precision cutting and shaping of sheet metal, ensuring a CHINAMFG foundation. Components are assembled with meticulous care, from welding to the installation of noise-reducing mufflers, and coated for protection. Rigorous testing and careful packaging guarantee quality and safe delivery, reflecting our commitment to CHINAMFG in every compressor we craft.

Our factory integrates advanced machinery to craft top-quality air compressors. Laser cutting and bending machines create precise metal components, while welding builds a durable structure. Test equipment ensures performance and safety, spray booths protect and enhance aesthetics, and efficient forklift handling streamlines production, delivering reliable products to our customers.

Customer testimonials overwhelmingly reflect high satisfaction with our air compressor products and service. Clients are consistently impressed by the durability and performance of our air compressors, noting their superior quality and suitability for various industrial needs. Ease of installation, impressive power output, and the smooth operation of our machines are frequently highlighted as key attributes.

Air compressors play a key role in many scenarios. In laboratory gas supply, they ensure precise and stable air pressure; in automotive spraying and metal stamping, they provide efficient power to improve production efficiency. In wood processing and rock drilling, air compressors drive tools to realize precise operation; in plastic production lines, stable airflow helps molding to ensure product quality. These application scenarios fully demonstrate the indispensability of air compressors in modern industrial production.

At exhibitions and customer visits, we carefully demonstrate the outstanding performance and innovative technology of our air compressors, allowing visitors to experience the advantages of their use in a wide range of industrial applications. From laboratory gas supply to automotive spraying, from metal stamping to wood processing to plastics production, the power and flexibility of air compressors were demonstrated in all aspects. Through on-site demonstrations and interactive exchanges, we not only enhanced our customers’ understanding of the product performance, but also collected valuable feedback.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

air compressor

What are the advantages of using an air compressor in construction?

Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:

Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.

It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.

In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.

air compressor

How do you choose the right air compressor for woodworking?

Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:

1. Required Air Volume (CFM):

Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.

2. Tank Size:

Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.

3. Maximum Pressure (PSI):

Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.

4. Noise Level:

Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.

5. Portability:

Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.

6. Power Source:

Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.

7. Quality and Reliability:

Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.

8. Budget:

Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.

By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.

air compressor

What maintenance is required for air compressors?

Maintaining air compressors is essential to ensure their optimal performance, longevity, and safe operation. Regular maintenance helps prevent breakdowns, improves efficiency, and reduces the risk of accidents. Here are some key maintenance tasks for air compressors:

1. Regular Inspection: Perform visual inspections of the air compressor to identify any signs of wear, damage, or leaks. Inspect the compressor, hoses, fittings, and connections for any abnormalities. Pay attention to oil leaks, loose bolts, and worn-out components.

2. Oil Changes: If your air compressor has an oil lubrication system, regular oil changes are crucial. Follow the manufacturer’s recommendations for the frequency of oil changes and use the recommended oil type. Dirty or degraded oil can impact compressor performance and lead to premature wear.

3. Air Filter Cleaning or Replacement: Clean or replace the air filter regularly to ensure proper air intake and prevent contaminants from entering the compressor. Clogged or dirty filters can restrict airflow and reduce efficiency.

4. Drain Moisture: Air compressors produce moisture as a byproduct of the compression process. Accumulated moisture in the tank can lead to rust and corrosion. Drain the moisture regularly from the tank to prevent damage. Some compressors have automatic drains, while others require manual draining.

5. Belt Inspection and Adjustment: If your compressor has a belt-driven system, inspect the belts for signs of wear, cracks, or tension issues. Adjust or replace the belts as necessary to maintain proper tension and power transmission.

6. Tank Inspection: Inspect the compressor tank for any signs of corrosion, dents, or structural issues. A damaged tank can be hazardous and should be repaired or replaced promptly.

7. Valve Maintenance: Check the safety valves, pressure relief valves, and other valves regularly to ensure they are functioning correctly. Test the valves periodically to verify their proper operation.

8. Motor and Electrical Components: Inspect the motor and electrical components for any signs of damage or overheating. Check electrical connections for tightness and ensure proper grounding.

9. Keep the Area Clean: Maintain a clean and debris-free area around the compressor. Remove any dirt, dust, or obstructions that can hinder the compressor’s performance or cause overheating.

10. Follow Manufacturer’s Guidelines: Always refer to the manufacturer’s manual for specific maintenance instructions and recommended service intervals for your air compressor model. They provide valuable information on maintenance tasks, lubrication requirements, and safety precautions.

Regular maintenance is vital to keep your air compressor in optimal condition and extend its lifespan. It’s also important to note that maintenance requirements may vary depending on the type, size, and usage of the compressor. By following a comprehensive maintenance routine, you can ensure the reliable operation of your air compressor and maximize its efficiency and longevity.

<img src="https://img.hzpt.com/img/air-compressor/air-compressor-L1.webp" alt="China Best Sales Single-Stage Low Pressure 75HP Oil Lubricated Rotary Pm VSD Screw Air Compressor arb air compressor”><img src="https://img.hzpt.com/img/air-compressor/air-compressor-L2.webp" alt="China Best Sales Single-Stage Low Pressure 75HP Oil Lubricated Rotary Pm VSD Screw Air Compressor arb air compressor”>
editor by lmc 2024-10-21

China high quality Modern Resort Hotel Villa Wicker Rattan Rope Restaurant Dining Chair vacuum pump ac system

Product Description

Modern hot sale home Resort Hotel villa wicker rattan rope Indoor and Outdoor Restaurant Dining chair furniture

We are a professional manufacturer of outdoor furniture with more than 20 years of experience. Extensive OEM experience gives us the ability to complete your design with simple drawings or pictures.

In every department of our factory have professional quality inspection personnel, they will check every small parts, only CHINAMFG the standard parts can flow into the next department, so as to maximize the reduction of defective. Even so, we
have a professional full inspection careful check of the product before packing, in the case of ensure that the product qualified finished CHINAMFG and waiting for the shipment.

Professional powder coating line strictly controls the CHINAMFG temperature, ensure the stability of product color and powder adhesion. The diversified wood grain color of manual brush is the feature of our factory. The workers brush out the ideal wood grain by hands. The finished product is absolutely thought to be natural wood if you do not touch and knock, to
CHINAMFG the effect of wood imitation with aluminum.

We have professional weaving workers those whom with decades of experience, and the woven products are close and smooth. Our factory requires that the products must be woven with long rattan material, to reduce nailing as much as possible. Although the production schedule will be slowed down a lot, it increases the firmness and durability of the
products.

A perfect product is also inseparable from the quality of the packaging. We have various ways of packing, just like normal carton box, dolly pack, shaped box CHINAMFG etc. We will help customers to save the transportation space base on the perfect protect productions and do our best to save our customers transportation costs.

Our sales team has more than 15 years of experience of outdoor furniture, and understands every production process; we
can solve all kinds of professional problems for you and answer your questions in time. We will give professional suggestion and information to help you choose the right styles. We also provide high resolution photos service and detail photos for
your close checking your orders from beginning producing to loading container.

We have established long term business with more than 30 raw material suppliers. We have an efficient supply chain management system to make sure the delivery on time. We focus on producing outdoor furniture, but also supply Sun-umbrella, bean bags, hammock etc. to support with one-stop shopping service to save your time and cost.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

What are the best practices for assembling and maintaining outdoor furniture with glass tops?

Assembling and maintaining outdoor furniture with glass tops requires careful attention to ensure proper installation and long-term durability. Here are some best practices to consider:

1. Assembling Outdoor Furniture:

Follow the manufacturer’s instructions carefully when assembling outdoor furniture with glass tops. Ensure that all parts are correctly aligned and securely fastened to prevent any instability or accidents.

2. Handle with Care:

When handling glass tops, wear protective gloves and take care to avoid dropping or banging them against hard surfaces. Glass can be fragile, so handle it with caution to prevent cracks or damage.

3. Use Protective Pads or Cushions:

Place protective pads or cushions between the glass top and the frame to prevent direct contact and reduce the risk of scratches or chipping. These pads also help provide stability and prevent the glass from sliding or shifting.

4. Avoid Excessive Weight or Pressure:

Avoid placing excessive weight or applying strong pressure on the glass top. Glass can be susceptible to breaking or cracking under heavy loads or impact. Use caution when placing objects on the surface and avoid sitting or standing on the glass top.

5. Clean Regularly:

Regularly clean the glass top using a mild glass cleaner and a soft, non-abrasive cloth or sponge. Avoid using harsh chemicals or abrasive materials that can scratch or damage the glass. Wipe away any spills or debris promptly to prevent staining.

6. Protect from Extreme Temperatures:

Avoid exposing outdoor furniture with glass tops to extreme temperature changes. Sudden temperature variations can cause the glass to expand or contract, leading to potential cracking or breakage. Consider using protective covers or moving the furniture to a shaded area during extreme weather conditions.

7. Inspect for Damage:

Regularly inspect the glass top for any signs of damage, such as cracks, chips, or loose fittings. If you notice any issues, address them promptly. Repair or replace the glass as necessary to maintain the integrity and safety of the furniture.

8. Store During Winter or Inclement Weather:

If possible, store outdoor furniture with glass tops indoors or in a covered area during the winter or periods of inclement weather. This protects the glass from potential damage caused by freezing temperatures, snow, or heavy rain.

9. Follow Safety Guidelines:

Adhere to safety guidelines provided by the manufacturer and any local regulations regarding the use and maintenance of outdoor furniture with glass tops. These guidelines may include weight restrictions, recommended cleaning methods, or other specific instructions to ensure safe and proper use.

By following these best practices, you can assemble and maintain outdoor furniture with glass tops effectively, promoting longevity and enjoyment of your outdoor living space.

oudoor furniture

Can you suggest creative ways to arrange outdoor furniture for gatherings?

Arranging outdoor furniture in creative ways can enhance the ambiance and functionality of your outdoor gatherings. Here are some suggestions for arranging outdoor furniture for gatherings:

1. Circular Conversation Area: Create a circular seating arrangement by arranging chairs or sofas in a circle. This layout encourages conversation and allows everyone to see and interact with each other. Place a central coffee table or fire pit in the middle to provide a focal point and space for drinks or snacks.

2. Outdoor Dining Setup: If you’re hosting a meal outdoors, set up a dining area with a large table and chairs. Position the table in a central location and arrange the chairs around it. You can opt for traditional dining chairs or mix it up with benches or a combination of seating options. Consider adding outdoor lighting, such as string lights or lanterns, to create a cozy and inviting atmosphere.

3. Intimate Lounge Area: Create a cozy and intimate lounge area by arranging outdoor sofas, loveseats, or lounge chairs facing each other. This setup is ideal for relaxed conversations or smaller gatherings. Add side tables or a coffee table between the seats for convenience.

4. Outdoor Theater Setup: Turn your outdoor space into a mini theater by arranging seating in a semi-circle or facing a large projection screen or outdoor TV. Provide comfortable seating options such as reclining chairs, outdoor bean bags, or even large floor cushions. Consider adding blankets or throws for extra coziness during evening gatherings.

5. Multiple Seating Areas: If you have a large outdoor space, consider creating multiple seating areas to accommodate different activities and conversations. You can have a lounge area for relaxed conversations, a dining area for meals, and a separate area with chairs or stools for mingling or enjoying a view. Use outdoor rugs or different flooring materials to visually define each seating area.

6. Outdoor Bar Setup: If you enjoy hosting outdoor parties, create a dedicated outdoor bar area. Set up a bar counter or a portable bar cart and arrange bar stools around it. Equip the bar area with essential accessories like a cocktail shaker, glasses, and a small refrigerator or cooler for drinks.

7. Cozy Corner Nooks: Utilize corners or nooks in your outdoor space by creating cozy seating areas. Place a bench or a small loveseat against a wall or a corner, and add cushions and throw pillows for comfort. This setup provides a secluded spot for quiet conversations or relaxation.

Remember to consider the flow of movement and the specific needs of your gatherings when arranging outdoor furniture. Leave enough space for guests to move around comfortably and ensure easy access to amenities like food, drinks, and restrooms.

oudoor furniture

What are the benefits of investing in high-quality outdoor furniture?

Investing in high-quality outdoor furniture offers numerous benefits that make it a worthwhile investment. Here are the key advantages of choosing high-quality outdoor furniture:

1. Durability and Longevity: High-quality outdoor furniture is built to withstand the elements and is often made from durable materials. It can resist fading, rusting, warping, and other forms of damage caused by sun exposure, rain, wind, or temperature fluctuations. Investing in durable furniture ensures it lasts for many years, saving you money in the long run.

2. Comfort and Ergonomics: High-quality outdoor furniture is designed with comfort in mind. It often includes features such as ergonomic shapes, supportive cushions, and adjustable components. You and your guests can enjoy the outdoor space comfortably, whether you’re lounging, dining, or socializing.

3. Enhanced Aesthetics: High-quality outdoor furniture tends to have better craftsmanship and attention to detail, resulting in a more attractive and visually appealing appearance. It can elevate the aesthetic appeal of your outdoor space, creating a stylish and inviting atmosphere.

4. Low Maintenance: High-quality outdoor furniture typically requires less maintenance compared to lower-quality alternatives. It is often designed to be resistant to stains, fading, and other forms of wear and tear, reducing the need for frequent cleaning or repairs. This saves you time and effort in maintaining your outdoor furniture.

5. Functionality and Versatility: High-quality outdoor furniture often offers a range of functional features and versatile designs. It may include modular components, adjustable settings, or multi-purpose functionality, allowing you to adapt the furniture to different activities or changing needs. This flexibility enhances the usability and practicality of your outdoor space.

6. Warranty and Customer Support: High-quality outdoor furniture is often backed by warranties from the manufacturer or retailer. This provides peace of mind, as you can rely on the warranty to address any manufacturing defects or issues that may arise. Additionally, reputable brands that offer high-quality furniture often have good customer support, ensuring you receive assistance if needed.

7. Value and Investment: While high-quality outdoor furniture may have a higher upfront cost, it offers better value and return on investment over time. The durability, longevity, and overall performance of high-quality furniture make it a wise investment that can withstand the test of time and provide enjoyment for years to come.

By investing in high-quality outdoor furniture, you can create a comfortable, durable, and visually appealing outdoor space that enhances your lifestyle and adds value to your home.

editor by lmc 2024-10-21

China supplier High Quality Aluminium Pergola Outdoor Gazebo Garden Sun Glass Sunroom vacuum pump ac

Product Description

Gazebo Patio Hotels Coastal Farmhouse CHINAMFG CHINAMFG Contemporary Rustic Eclectic CHINAMFG Sale High Quality Aluminium Pergola

Details	Easily Assembled, Sustainable, Eco Friendly, Waterproof, Rot Proof, Renewable Sources, Reused etc.
Material	Extruded CHINAMFG Alloy (6063-T5)
Application	Residential Buildings Patio
Size	33m,34m,3*5m,3x6m,or customized
Finish	Powder Coated / black , silvery or customized
Drainage	Hidden Drainage System
Main materials	Frame, flooring, Louvered, Retractable roof, led screen, glass screen, LED,
QC QA	1:1 Pre-assemble in TIANYU’s factory
Aluminum profile size	93x93mm
Aluminum thickness	2.0×2.2×2.0mm
3D free Design	Drawings designed according to the customer’s requirements
Decoration frames	Horizontal Louvered,Vertical Louvered,WPC horizontal, wood Louvered,Vertical Louvered for top,Private Louvered,Glass etc.
aluminum profile color	Black, white or customized color
Used	Indoor or outdoor
Main style	Box style, freestanding style or customized style

Q1: Do you have installers or can you send installation team to project site?
A: Normally, we provide you with installation manual or instructions
Q2: What about your package?
AC: We have perfect packaging: 1. First protection using thick paper and foam; 2. Wooden shelf for the secondprotection;
3. The inner part with pearl cotton, the outer part is fixed with wooden box
Q3: Do you accept factory visits?
A: Of course, welcome to visit our Factory and you can know our products really. If you can’t get to the factory,we can also
provide you with live broadcast.
Q4: How can I trust you?
A: we are also a SGS TUV ITS
verified company with guaranteed products and services.
Q5: Will you offer samples?
A: If you want to confirm the material or quality, we can provide you samples.
Q6: How can you meet the effect I want?
A: We will customize the plan for each client. After getting the size, we will give you the floor plan and the decoration rendering
so that you can see at a glance whether it is the effect you want.
Q7: How to guarantee the quality of the products ?
A: We have our own QC team to control the products quality for all our clients’ orders before loading.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

Are there any creative ways to arrange aluminum garden furniture for outdoor gatherings?

Yes, there are several creative ways to arrange aluminum garden furniture for outdoor gatherings. Here are some ideas to inspire you:

1. Conversation Pit:

Create a cozy and intimate setting by arranging your aluminum furniture in a circular or semi-circular layout, facing each other. This arrangement encourages conversation and interaction among guests, making it ideal for small gatherings or casual get-togethers.

2. Outdoor Dining Setup:

If you have an aluminum dining set, arrange it in a traditional dining setup with a table in the center and chairs placed around it. This arrangement is perfect for outdoor meals and formal gatherings. Consider adding a tablecloth, centerpiece, and ambient lighting to enhance the dining experience.

3. Lounge and Relaxation Area:

If you have aluminum lounge chairs or sofas, create a comfortable relaxation area by arranging them in a way that promotes relaxation and leisure. Place the furniture near a poolside, under a shade, or overlooking a scenic view. Add side tables or ottomans for convenience.

4. Modular and Flexible Layout:

If your aluminum furniture has modular or sectional pieces, take advantage of their flexibility. Arrange the modules in various configurations to suit the needs of each gathering. You can create a large seating area, divide the furniture into smaller groups, or even form a U-shape or L-shape setup.

5. Focal Point Arrangement:

Create a focal point by arranging the furniture around a central element such as a fire pit, water feature, or outdoor fireplace. This arrangement not only provides a gathering point but also adds visual interest and creates a cozy atmosphere.

6. Outdoor Bar Setup:

If you have a bar table or a high-top aluminum dining set, create an outdoor bar setup. Position the bar table with stools or high chairs, add some decorative lighting, and set up a drink station. This arrangement is perfect for casual gatherings and cocktail parties.

7. Coordinated Seating Areas:

If you have a large outdoor space, consider creating multiple seating areas with coordinated aluminum furniture. For example, you can have a lounge area with sofas and coffee tables, a dining area with a table and chairs, and a relaxation corner with recliners. This allows guests to move around and enjoy different spaces within the gathering.

8. Mix and Match Styles:

Don’t be afraid to mix and match different styles of aluminum furniture to create an eclectic and personalized look. Combine lounge chairs, dining chairs, benches, and other seating options to add variety and interest to the arrangement.

These are just a few creative ways to arrange your aluminum garden furniture for outdoor gatherings. Consider the size of your space, the type of gathering, and the comfort and flow of the arrangement to create a welcoming and functional outdoor environment.

oudoor furniture

What are the ideal cushions and fabrics for aluminum garden furniture that won’t absorb moisture?

When it comes to cushions and fabrics for aluminum garden furniture that won’t absorb moisture, there are a few options that are well-suited for outdoor use. Here are some ideal choices:

1. Solution-Dyed Acrylic:

Solution-dyed acrylic fabrics are a popular choice for outdoor cushions and upholstery. They are highly resistant to moisture and won’t absorb water easily. Additionally, they are fade-resistant, durable, and resistant to mildew. Solution-dyed acrylic fabrics come in a wide range of colors and patterns, allowing you to find the perfect style for your aluminum garden furniture.

2. Polyester:

Polyester fabrics are another good option for outdoor cushions. They are naturally water-resistant and dry quickly, making them suitable for environments with moisture. Polyester fabrics are also known for their durability and resistance to fading, making them a practical choice for outdoor furniture.

3. Vinyl:

Vinyl fabrics are highly water-resistant and easy to clean, making them ideal for outdoor use. They are often used for cushions and upholstery in areas where moisture is a concern. Vinyl fabrics are available in a variety of colors and textures, providing versatility in design options for your aluminum garden furniture.

4. Olefin:

Olefin fabrics are known for their resistance to moisture and mildew. They have low water absorbency, which makes them suitable for outdoor cushions. Olefin fabrics are also resistant to fading and staining, making them a durable choice for outdoor furniture that will retain its appearance over time.

5. Sunbrella:

Sunbrella is a well-known brand of outdoor fabrics that are highly resistant to moisture. They are made from acrylic fibers that are solution-dyed, offering excellent water repellency. Sunbrella fabrics are also fade-resistant, easy to clean, and come in a wide range of colors and patterns to suit various design preferences.

When choosing cushions and fabrics for your aluminum garden furniture, look for materials that are specifically labeled as suitable for outdoor use. These fabrics are designed to withstand the elements and resist moisture absorption. It’s also a good idea to consider cushions with quick-drying foam or inserts to further prevent moisture retention.

By selecting cushions and fabrics made from these moisture-resistant materials, you can ensure that your aluminum garden furniture remains comfortable and free from moisture-related issues, even in outdoor environments.

oudoor furniture

What are the advantages of lightweight aluminum garden furniture?

Lightweight aluminum garden furniture offers several advantages due to its unique properties. Here are some of the benefits of choosing lightweight aluminum garden furniture:

1. Easy Portability:

One of the primary advantages of lightweight aluminum garden furniture is its ease of portability. Aluminum is significantly lighter than materials like iron or steel, making it easier to move and rearrange your furniture as needed. Whether you want to change the seating arrangement, relocate the furniture to a different spot in the garden, or store it during certain seasons, the lightweight nature of aluminum makes these tasks much more convenient.

2. Maneuverability:

Due to its lightweight nature, aluminum garden furniture is highly maneuverable. You can easily carry and position the furniture without straining yourself. This aspect is particularly beneficial if you frequently need to move the furniture around to accommodate different occasions or activities in your outdoor space.

3. User-Friendly Assembly:

Lightweight aluminum furniture is often designed with user-friendly assembly in mind. The lighter weight makes it easier for individuals to handle and assemble the furniture pieces without requiring excessive strength or assistance. This aspect can be particularly useful when setting up or disassembling the furniture during different seasons or when moving to a new location.

4. Versatile Placement:

Because of its lightweight nature, aluminum garden furniture can be placed on various surfaces without causing damage or leaving significant imprints. Whether you have a patio, deck, grassy area, or uneven terrain, lightweight aluminum furniture can be easily positioned without the need for extensive modifications or reinforcements.

5. Efficient Storage:

Lightweight aluminum garden furniture is highly suitable for storage purposes. When not in use or during the off-season, you can stack, fold, or disassemble the furniture pieces and store them in a compact manner. This efficient storage capability is especially valuable if you have limited storage space.

6. Ease of Maintenance:

Another advantage of lightweight aluminum garden furniture is the ease of maintenance. Aluminum is resistant to rust, which eliminates the need for regular treatments or coatings to prevent corrosion. Additionally, cleaning lightweight aluminum furniture is relatively simple and can often be accomplished with mild soap and water or a gentle household cleaner.

In summary, the advantages of lightweight aluminum garden furniture include easy portability, maneuverability, user-friendly assembly, versatile placement options, efficient storage, and ease of maintenance. These features make lightweight aluminum an attractive choice for outdoor furniture, allowing you to enjoy your outdoor space with convenience and flexibility.

editor by lmc 2024-10-21

China manufacturer Swing Chair Garden Furniture Outside Sofa Play Game Lake Chair Children Sitting vacuum pump booster

Product Description

Swing chair

METAL PAITING (white / chrome / silver / bronze )

PLASTIC COVER( white / black /grey )

SOFT CUSHION (color can choose by customer)

Packaging & Shipping

KD packing

metal part 10pcs per roll

the cushion 1pcs per a bag

the seater 15pcs per roll

Company Profile

JYX Home Furnishing Co., Ltd. , a leading manufacturer & exporter in furniture since 2571, covers more than 5,000 square meters.We supply all kinds of office chair and computer desks and sofa bed. Creative designs, strict management, high quality and the most attractive prices make our products have a good reputation in the domestic and international market. As a specialized manufacturer, JYX has excellent experts with years’ experience of modern furniture. Now there are more than 100 staffs in the company. With the skilled technology and strict management.

Our Advantages

“Quality first, trust first, service first” is our main principle.JYX has a strong commitment to customer satisfaction, and every employee realizes that the company lives on such commitment. Our goal is not to meet, but to exceed our customers’ expectations all the time. Now we are enjoying a very good relationship with our customers.

FAQ

1.What’s your advantage?

1) Safety. We are the CHINAMFG supplier of Made in China and have trade assurance on it.

2) Professional. Design and manufacturing high quality ergonomic chairs.

3) Fast deliver. 1*40HQ takes 15-20days delivery time.

2.Can I negotiate the prices?

Yes, we have special discount for long time copperation companies.

3.Can I get a Sample before mass order ?

Yes, of course, sample is available.

4.What is your terms of delivery?

We accept EXW, FOB, CNF, CIF, ect. You can choose the 1 which is the most convenient and cost effective for you.

5.How much will be the Shipping cost and time ?

This will depend on the purchasing quantity of your goods and the method of shipping, by sea or by air, and your destination port.

6. When can I get the price?

We usually quote you immediately, if you are urgent, pls contact sales manager Mr. CHINAMFG for quick feedbacks.

7. Can you give warranty of your products ?

Yes, all chairs with 1 years. Some chairs passed BIFMA standard, as well as EN1335 with 5 years Guarantee.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

What should I consider when selecting covers for my garden furniture?

When selecting covers for your garden furniture, there are several factors to consider to ensure proper protection and longevity of your outdoor furniture. Here are some key considerations:

1. Size and Fit:

Choose covers that are specifically designed to fit your furniture pieces. Measure the dimensions of your furniture, including width, depth, and height, and select covers that match those measurements. A well-fitting cover will provide better protection and prevent damage from exposure to the elements.

2. Material and Durability:

Opt for covers made from durable and weather-resistant materials. Common options include polyester, vinyl, and specialized outdoor fabrics. These materials should be waterproof, UV-resistant, and able to withstand varying weather conditions. Look for covers with reinforced seams and strong fastening mechanisms for added durability.

3. Breathability:

Consider covers that offer breathability to prevent the buildup of moisture and condensation. Breathable covers allow air circulation, which helps prevent mold, mildew, and rust from forming on your furniture.

4. Easy Installation and Removal:

Choose covers that are easy to install and remove. Look for covers with elastic hems, drawstrings, or fastening straps that provide a secure and snug fit. Covers that are easy to put on and take off make it more convenient to protect and uncover your furniture as needed.

5. Ventilation and Airflow:

Ensure that the covers have vents or mesh panels to allow for proper airflow. Ventilation helps prevent the buildup of heat and moisture, which can lead to condensation and potential damage to your furniture.

6. Style and Aesthetics:

If aesthetics are important to you, consider covers that complement the overall look and style of your outdoor space. Some covers come in a variety of colors and designs, allowing you to choose options that blend well with your garden decor.

7. Storage and Portability:

Keep in mind the storage and portability of the covers when they are not in use. Look for covers that are easy to fold or roll up for compact storage. Additionally, consider covers that come with their own storage bags or cases for convenience.

8. Brand and Reviews:

Research and choose reputable brands known for producing high-quality covers. Read customer reviews and ratings to get insights into the performance and durability of the covers you are considering.

By considering these factors, you can select covers that provide effective protection for your garden furniture, keeping it safe from rain, sun, dirt, and other outdoor elements. Properly covering your furniture when not in use helps prolong its lifespan and reduces the need for extensive cleaning and maintenance.

oudoor furniture

Can garden furniture be customized to match my outdoor space and style?

Yes, garden furniture can often be customized to match your outdoor space and style. Customization options allow you to create a cohesive and personalized look that complements your overall aesthetic. Here are some ways you can customize your garden furniture:

1. Material Selection:

Choose the materials for your garden furniture based on your desired style and the existing elements in your outdoor space. Options may include wood, metal, wicker, rattan, or plastic. Each material has its own unique appearance and characteristics, allowing you to select the one that best aligns with your preferred style.

2. Finish and Color:

Customize the finish and color of your garden furniture to match your outdoor space and personal style. Wood furniture can be stained or painted in various colors to achieve the desired look. Metal furniture can be powder-coated in different shades or finishes. Wicker and rattan furniture often come in a variety of natural or synthetic fiber colors. Plastic furniture may be available in a range of vibrant or neutral tones.

3. Cushion and Upholstery Fabrics:

Consider the fabric options for cushions and upholstery to coordinate with your outdoor space and style. Choose fabrics in colors, patterns, and textures that complement the overall aesthetic. There are numerous outdoor-grade fabrics available that are designed to withstand exposure to sunlight, moisture, and other environmental factors.

4. Modular and Configurable Designs:

Opt for modular or configurable designs that allow you to customize the layout and arrangement of your garden furniture. These designs often feature individual pieces that can be rearranged to suit your specific space and needs. This flexibility enables you to create a seating arrangement that fits well within your outdoor area.

5. Accessories and Accents:

Add accessories and accents to your garden furniture to further personalize and match your outdoor space. This can include items such as decorative pillows, throws, outdoor rugs, or table centerpieces. These small details can tie together the overall style and create a cohesive look.

6. Built-in Features:

If you have specific requirements or preferences, consider customizing your garden furniture with built-in features. This could include built-in storage compartments, drink holders, or adjustable components. Built-in features can enhance the functionality and convenience of your furniture while catering to your personal needs.

7. Professional Customization:

If you have a specific vision or require intricate customization, you may consider consulting with professional furniture makers or designers. They can help bring your ideas to life, create unique pieces tailored to your outdoor space, and suggest innovative customization options based on their expertise.

When customizing your garden furniture, ensure that any modifications or additions do not compromise the structural integrity or safety of the furniture. It’s also important to consider the durability and maintenance requirements of the customizations, especially in outdoor environments.

By exploring the various customization options available and considering your personal style and outdoor space, you can create garden furniture that is unique, visually appealing, and perfectly suited to your needs.

oudoor furniture

What are the best materials for garden furniture that can withstand outdoor conditions?

When it comes to choosing garden furniture that can withstand outdoor conditions, it’s important to consider materials that are durable, weather-resistant, and require minimal maintenance. Here are some of the best materials for garden furniture:

1. Teak:

Teak is a popular choice for outdoor furniture due to its natural durability and resistance to water, rot, and insects. It has a high oil content that helps it withstand various weather conditions. Teak furniture can last for decades with proper care and maintenance.

2. Aluminum:

Aluminum is lightweight, rust-resistant, and highly durable, making it an excellent choice for outdoor furniture. It is easy to clean and requires minimal maintenance. Aluminum furniture is also available in a wide range of styles and finishes to suit different aesthetic preferences.

3. Wrought Iron:

Wrought iron is known for its strength and durability. It can withstand harsh weather conditions and is resistant to rust and corrosion. Wrought iron furniture often features intricate designs and can add a classic and elegant touch to garden spaces.

4. Synthetic Wicker:

Synthetic wicker, also known as resin wicker or all-weather wicker, is a popular choice for outdoor furniture. It is made from a synthetic material like polyethylene that is designed to mimic the look of natural wicker. Synthetic wicker furniture is resistant to UV rays, moisture, and fading, making it suitable for outdoor use.

5. Stainless Steel:

Stainless steel is highly resistant to corrosion, making it a durable option for outdoor furniture. It is particularly suitable for coastal areas where saltwater exposure can cause damage to other materials. Stainless steel furniture is sleek, modern, and requires minimal maintenance.

6. HDPE (High-Density Polyethylene):

HDPE is a synthetic material that is used to make durable and weather-resistant outdoor furniture. It is resistant to moisture, rot, and insects. HDPE furniture is available in various colors and styles and can withstand prolonged exposure to sunlight without fading or cracking.

7. Cedar:

Cedar is a type of wood that is naturally resistant to decay, rot, and insects. It has a pleasant aroma and is known for its durability. Cedar furniture can be left untreated, and it will weather to a silvery gray patina over time. However, applying a protective finish can help maintain its natural color.

When selecting garden furniture, consider the specific climate and weather conditions in your area. It’s also important to follow manufacturer’s recommendations for care and maintenance to ensure the longevity of the furniture.

editor by lmc 2024-10-21

China Standard Tg Factory Price Wholesale Outdoor Dining Sets Garden Sets Teak Luxury Restaurant Hotel Home Wood Dining Table Furniture with Chairs Set with Good quality

Product Description

Product Parameters

Products Name	teak dining set
Products Number	TOP GLORY
Raw Materials	* Artisan-built of all-weather materil, this collection is precision welded and powdercoated for unsurpassed quality, strength and longevity * A blend of beauty and functionality, our weather-resistant CHINAMFG is a product of enduring design and cutting-edge technology * Hand-finished to ensure smooth edges, the frame is triple coated with a UV-inhibiting sealant that’s 10 times more durable than paint * Designed for superior CHINAMFG and longevity, cushions for this collection are sold separately * Premium Quick-Dry cushions are engineered with an open-cell reticulated foam core and mesh bottom panel, allowing water to drain rapidly and air to circulate freely * Cushions come in a choice of performance fabrics with easy-care fibers that resist stains, spills, fading and mildew, with zippers that resist corrosion * Our custom-fit outdoor covers (sold separately) feature superior water repellency and are strongly recommended to protect furniture from the elements and minimize aging.

Are there any specific outdoor furniture recommendations for hot and sunny climates?

When choosing outdoor furniture for hot and sunny climates, it’s important to consider materials and features that can withstand the intense heat and sun exposure. Here are some specific recommendations:

1. Heat-Resistant Materials:

Opt for outdoor furniture made from heat-resistant materials such as aluminum, wrought iron, or teak. These materials have the ability to withstand high temperatures without warping or deteriorating.

2. UV-Resistant Fabrics:

Choose outdoor furniture with UV-resistant fabrics for cushions and upholstery. These fabrics are designed to resist fading and damage from prolonged sun exposure.

3. Breathable Fabrics:

In hot climates, it’s essential to choose outdoor furniture with breathable fabrics that allow for air circulation. Look for materials like mesh, quick-drying fabrics, or open-weave designs that promote airflow and help keep you cool.

4. Light Colors:

Light-colored outdoor furniture tends to reflect sunlight rather than absorb it, helping to keep the furniture and seating surfaces cooler. Opt for furniture in neutral or light shades to minimize heat absorption.

5. Shade Options:

Consider outdoor furniture that incorporates built-in shade options. Look for features like umbrellas, canopies, or pergolas that provide shade and protection from direct sunlight.

6. Ventilation and Airflow:

Choose outdoor furniture designs that facilitate ventilation and airflow. Look for slatted designs or furniture with open weaves that allow air to circulate freely, reducing heat buildup.

7. Portable and Versatile:

In hot climates, it can be beneficial to have furniture that is portable and versatile. Look for lightweight pieces that are easy to move and rearrange to take advantage of shade or breeze as the day progresses.

8. Storage Options:

Consider outdoor furniture that offers storage options. This can include built-in storage compartments or furniture that can be easily disassembled and stored during extreme weather conditions or extended periods of non-use.

9. Regular Maintenance:

Proper maintenance is crucial for outdoor furniture in hot and sunny climates. Regularly clean and protect the furniture according to the manufacturer’s instructions to prolong its lifespan and preserve its appearance.

By considering these recommendations, you can select outdoor furniture that is well-suited to hot and sunny climates, providing both comfort and durability in the face of intense heat and sun exposure.

oudoor furniture

Are there any space-saving outdoor furniture options for small patios or balconies?

Yes, there are several space-saving outdoor furniture options available specifically designed for small patios or balconies. These furniture pieces are designed to maximize functionality while taking up minimal space. Here are some popular options:

1. Folding Furniture:

Folding furniture is a versatile choice for small outdoor spaces. Folding chairs, tables, and benches can be easily folded and stored when not in use, allowing you to create more space when needed.

2. Stackable Furniture:

Stackable chairs or stools are practical for compact spaces. These chairs can be stacked and stored vertically, minimizing the footprint. Look for lightweight and durable materials such as aluminum or plastic.

3. Wall-Mounted Furniture:

Consider wall-mounted tables or benches that can be folded down when needed and folded up against the wall when not in use. This option is ideal for balconies where floor space is limited.

4. Hanging Chairs or Hammocks:

If you have a sturdy overhead structure, hanging chairs or hammocks can provide comfortable seating options without taking up floor space. They can be easily installed and removed as needed.

5. Compact Bistro Sets:

Bistro sets are designed for small outdoor spaces. They typically consist of a small table and two chairs, providing a cozy and functional seating area without overwhelming the space.

6. Built-In Seating:

Consider built-in benches or seating options that can be integrated into your patio or balcony design. These can be customized to fit the available space and provide storage compartments underneath for additional functionality.

7. Multifunctional Furniture:

Look for furniture pieces that serve multiple purposes. For example, ottomans or coffee tables with hidden storage can double as seating or provide a place to keep cushions or other outdoor accessories.

8. Vertical Gardens:

If floor space is limited, vertical gardens or hanging planters can add greenery and enhance the ambiance of your small outdoor space without taking up valuable floor space.

When shopping for space-saving outdoor furniture, consider the dimensions, materials, and functionality of each piece. Take accurate measurements of your patio or balcony to ensure the furniture will fit comfortably. Additionally, consider the weather resistance and durability of the materials used, especially if your outdoor space is exposed to the elements.

By selecting the right space-saving furniture options, you can create a functional and enjoyable outdoor space, even with limited square footage.

oudoor furniture

How can I protect my outdoor furniture during the winter months?

Protecting your outdoor furniture during the winter months is crucial to ensure its longevity and keep it in good condition. Here are some tips to help you protect your outdoor furniture:

1. Clean and Prepare: Before winter arrives, thoroughly clean your outdoor furniture to remove any dirt, debris, or stains. Use a mild soap, water, and a soft brush or sponge. Rinse the furniture thoroughly and allow it to dry completely. Once clean, apply an appropriate protective finish or sealant if recommended by the manufacturer.

2. Store Indoors: If possible, consider storing your outdoor furniture indoors during the winter months. A garage, basement, or storage shed can provide protection from harsh winter weather. If space is limited, prioritize storing more delicate or valuable pieces, such as cushions or lightweight furniture, while heavier or more durable items may be left outside with proper coverings.

3. Use Furniture Covers: If storing your furniture indoors is not an option, use weather-resistant covers designed specifically for outdoor furniture. Look for covers made from durable materials that are waterproof, UV-resistant, and breathable. Properly cover each piece of furniture, including tables, chairs, and cushions, to keep them protected from snow, rain, and wind.

4. Elevate and Protect: When leaving furniture outside, elevate it from the ground to prevent moisture damage. Use furniture glides, blocks, or a raised platform to keep the furniture off the wet or frozen ground. Additionally, use furniture protectors or caps on the legs to prevent scratching or damage to delicate surfaces.

5. Remove Cushions and Fabric: If your outdoor furniture has removable cushions or fabric, it’s best to store them indoors during the winter. Clean the cushions thoroughly, allow them to dry completely, and store them in a dry and protected area. If storing indoors is not possible, use weather-resistant cushion storage bags or containers to keep them protected from moisture and pests.

6. Inspect and Maintain: Periodically check on your outdoor furniture during the winter months. Remove any accumulated snow or debris from the covers and ensure they are securely in place. Inspect the furniture for any signs of damage or wear and make any necessary repairs as soon as possible.

7. Avoid Excessive Weight: While it may be tempting to use your outdoor furniture as storage surfaces during the winter, it’s best to avoid placing heavy objects on them. Excessive weight can cause damage or warping, especially if the furniture is made from materials like wicker or plastic.

By following these tips, you can help protect your outdoor furniture during the winter months and extend its lifespan. Remember to always refer to the manufacturer’s guidelines and recommendations for specific care instructions for your furniture.

editor by lmc 2024-10-21

China manufacturer Portable CHINAMFG Beach Fishing Camping Folding Garden Chair vacuum pump booster

Product Description

Chair Size(cm)	506066.5cm	Material	steel tube, canvas
Package	1pc/Opp bag, 1pc/CTN or 5pcs/CTN	Weight capacity	100kgs
Lead Time	30 Days	Mini Order	100 Pcs
Customize	color, size, logo, materials all can be customized	Pillow	available

Detailed Photos

Packing & Warehouse

Why Choose Us

1 Professional & Good Credit — more then 10 years experiences, have all necessary equipment, skilled workers, and proved of good credit.
2 Trendy Products — Our design team always keep pace with the fashion trend and create the latest style.
3 Superior Quality — We strictly control the quality of fabric, rope, wood spread bar, and the production quality at each process.
4 Mature QC System — Quality checking during handover from 1 working flow to the next, and inspecton 1 by 1 before packing, to insure no defective items and mistakes.
5 Shipping On Time — 10000Sqm workshop and more then 200 workers guarantee timely shipping.
6 Good after service —we offer 1 year warranty , compensat with no excuse.

After Sales Service

1. 1 Year Warranty.
2. Compensate with no excuse if quality issue happen.

FAQ

Q1:Can you accept OEM/ODM services?
Yes, we can. You can have your own trade mark on both the products and the cartons.

Q2:How Long is the lead time for bulk order?
Usually, we ship within 30 days after deposit, partial shipment for big order, and more time is needed for customized products.

Q3:How to guarantee quality?
Before order confirmed, we will send you sample to comfirm the details and quality. We inspection the products 1 by 1 before packing.

Q4:How can I customize my own products ?
We can customize on both the product size and style. Give us the info of your products size, producton artwork requirements, or send us a sample, then we will make sample as your request and express to you for your confirmation .

Q5:Do you have any product qualification certifications?
Our products not only have quality testing certificates issued by authoritative domestic certification agencies, but also inspection certificates issued by foreign testing agencies

Q6:Do you accept samll order?
Yes, More than 50pcs per color is accepted.

Q7:Is sample available?
Yes.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

How do I protect my aluminum garden furniture from sun exposure and fading?

To protect your aluminum garden furniture from sun exposure and fading, you can take the following measures:

1. Use Protective Covers:

When your aluminum furniture is not in use, consider covering it with protective covers specifically designed for outdoor furniture. These covers shield the furniture from direct sunlight and help prevent fading. Make sure the covers are properly fitted and secure to withstand wind and other weather conditions.

2. Provide Shade:

If possible, position your furniture in shaded areas of your garden or use umbrellas, awnings, or pergolas to create shade. This will reduce direct exposure to intense sunlight and minimize the risk of fading.

3. Apply Protective Finishes:

Consider applying protective finishes, such as clear coats or sealants, to your aluminum furniture. These finishes can provide an additional layer of protection against UV rays and help maintain the original color of the furniture.

4. Move Furniture to Shaded Areas:

If your furniture is lightweight and portable, you can move it to shaded areas when the sun is at its strongest. This allows you to control the amount of sun exposure your furniture receives and reduce the risk of fading.

5. Clean and Maintain Regularly:

Regular cleaning and maintenance are essential for preserving the appearance of your aluminum furniture. Use a mild detergent and water to clean the furniture, removing any dirt, debris, or stains. Avoid using abrasive cleaners or brushes that may scratch the surface. By keeping your furniture clean, you can prevent dirt buildup that can contribute to fading.

6. Use UV-Protective Fabrics:

If your aluminum furniture has cushions or upholstery, opt for fabrics that offer UV protection. Look for outdoor fabrics specifically designed to resist fading and damage from sunlight. UV-protective fabrics will help prolong the lifespan of your cushions and maintain their vibrant colors.

7. Store Furniture During Long Periods of Non-Use:

If you anticipate long periods of non-use, such as during the winter or when you’re away on vacation, consider storing your aluminum furniture in a covered and dry area to protect it from prolonged sun exposure.

By implementing these protective measures, you can help protect your aluminum garden furniture from sun exposure and fading, ensuring that it remains in good condition and retains its aesthetic appeal for years to come.

oudoor furniture

What are the top considerations for selecting aluminum garden furniture for poolside areas?

When selecting aluminum garden furniture for poolside areas, there are several key considerations to keep in mind. These considerations will help ensure that the furniture is suitable for the poolside environment and meets your specific needs. Here are some of the top considerations:

1. Durability and Weather Resistance:

One of the primary considerations for poolside furniture is durability and weather resistance. The furniture should be able to withstand exposure to sunlight, chlorine, saltwater, and other pool chemicals without deteriorating or corroding. Look for aluminum furniture that is specifically designed for outdoor use and has been treated with protective coatings or finishes to enhance its resistance to the elements.

2. Rust Resistance:

Aluminum is naturally resistant to rust, making it an excellent choice for poolside furniture. However, it’s important to ensure that the furniture has proper rust-resistant features, such as stainless steel hardware or coated fasteners, to further enhance its durability in a poolside environment. Rust-resistant furniture will maintain its appearance and structural integrity over time.

3. Comfort and Ergonomics:

Comfort is another crucial consideration for poolside furniture. Look for aluminum furniture that includes comfortable cushions or seating surfaces. Consider the ergonomics of the furniture, such as backrest angles, seat depths, and armrest heights, to ensure optimal comfort for lounging by the pool. Test the furniture if possible or read customer reviews to gauge its comfort level.

4. Easy Maintenance:

Poolside furniture should be easy to clean and maintain due to the exposure to pool chemicals, sunscreen, and frequent use. Look for furniture with low-maintenance features, such as removable and washable cushion covers, as well as furniture frames that can be easily wiped down with mild soap and water. Avoid furniture with intricate designs or hard-to-reach crevices that can trap dirt and require extensive cleaning.

5. Safety Features:

Ensure that the aluminum furniture for poolside areas has appropriate safety features. Look for furniture that is stable and has non-slip feet or base to prevent accidental slips or tipping. Consider furniture with rounded edges or cushioned surfaces to minimize the risk of injuries. Additionally, check if the furniture meets relevant safety standards for outdoor use.

6. Style and Aesthetics:

Select aluminum garden furniture that complements the overall aesthetic of your poolside area. Consider the design, color, and finish of the furniture to ensure it matches your desired style. Aluminum furniture comes in a variety of styles, from modern and sleek to traditional and ornate, allowing you to find options that blend seamlessly with your poolside decor.

7. Size and Space:

Consider the available space in your poolside area when choosing aluminum furniture. Measure the area to ensure the furniture fits comfortably without overcrowding the space. Opt for furniture that is proportionate to the area and allows for easy movement and flow around the pool. Additionally, consider the number of people you expect to accommodate and choose furniture that provides adequate seating or lounging options.

By considering these factors, you can select aluminum garden furniture that is well-suited for poolside areas, combining durability, comfort, and style. Remember to also follow any additional guidelines or recommendations provided by the furniture manufacturer to ensure optimal performance and longevity of your poolside furniture.

oudoor furniture

What are the benefits of choosing aluminum garden furniture for outdoor spaces?

Choosing aluminum garden furniture for outdoor spaces offers several benefits. Aluminum is a popular material for outdoor furniture due to its unique characteristics and advantages. Here are some of the benefits of choosing aluminum garden furniture:

1. Lightweight and Easy to Move:

One of the significant advantages of aluminum garden furniture is its lightweight nature. Aluminum is much lighter than materials like iron or steel, making it easy to move and rearrange the furniture as needed. This lightweight property is especially beneficial if you frequently rearrange your outdoor space or need to store the furniture during certain seasons.

2. Rust-Resistant:

Aluminum is naturally rust-resistant, which makes it an excellent choice for outdoor furniture. Unlike iron or steel, which may require regular maintenance to prevent rust, aluminum does not rust. This resistance to rust ensures that your aluminum furniture can withstand exposure to various weather conditions, including rain and humidity, without corroding.

3. Durable and Long-Lasting:

Aluminum garden furniture is known for its durability and longevity. It is a sturdy material that can withstand the rigors of outdoor use. Aluminum furniture is resistant to cracking, warping, and bending, ensuring that it maintains its structural integrity over time. With proper care and maintenance, aluminum furniture can last for many years, providing you with long-lasting enjoyment.

4. Low Maintenance:

Another advantage of aluminum garden furniture is its low maintenance requirements. Unlike wooden furniture that may require staining or sealing, or iron furniture that may need regular painting or coating, aluminum furniture is relatively easy to maintain. It can be cleaned with mild soap and water or a gentle household cleaner. Additionally, aluminum furniture does not require any specific treatments or coatings to maintain its appearance and durability.

5. Versatile Design Options:

Aluminum garden furniture is available in a wide range of design options to suit various tastes and styles. Whether you prefer a modern, contemporary look or a more traditional aesthetic, you can find aluminum furniture that fits your outdoor space. Aluminum can be shaped and formed into different styles and designs, allowing for versatility in the appearance of the furniture.

6. Environmentally Friendly:

Aluminum is a highly recyclable material, making it an environmentally friendly choice for garden furniture. Choosing aluminum furniture supports sustainable practices by reducing the demand for new materials and minimizing waste. Additionally, aluminum furniture can be recycled at the end of its life cycle, further reducing its environmental impact.

Overall, aluminum garden furniture offers numerous benefits, including lightweight portability, rust resistance, durability, low maintenance, versatile design options, and environmental friendliness. These advantages make aluminum an attractive option for outdoor spaces, allowing you to create a stylish and long-lasting outdoor seating area.

editor by lmc 2024-10-21

China Professional Outdoor Furniture CHINAMFG Table Restaurant Garden Hotel Rectangle Dining Table manufacturer

Product Description

Outdoor Furniture CHINAMFG Table Restaurant Garden Hotel Rectangle Dining Table

Material Introduction:

1) Metal: CHINAMFG tube
2) Powder Coating: All frame will be treated by powder coating, the color can optional
3) Hight quality : nontoxic, washability, UV and weather resistance.
4) Lightweight, durable and easy to be relocated
5) Table Top:Galss,Ceramic,Spray Stone,Glass Based Ceramic,Plastic Wood,Aluminium Slats ect

Product Specification:

Item:	CW-AT082
Material:	Aluminum frame power coating + Ceramic Top Aluminium tube with 1.2mm/1.5mm/1.8mm ect size
Frame Surface:	Powder Coaated,color could be choose & customized
Packing way:	KD structure, Carton Box Packing
Advantage:	The outdoor range can be left in the garden outside day and night,365 days a year. Low maintenance,easy care.
Usage:	Outdoor,Patio,Garden, Hotel, Restaurant,Bistro, Cafe-Shop, Bar etc

No matter the size,appearance or function of the furniture,we can customize the furniture according to your requirements.
Don’t hesitate to share your idea with us by clicking here.

Detailed Photos

You Need More Details With Nice Price? Click Here to Learn More.

Company Profile

CTW Furniture Manufacturer is a professional outdoor furniture supplier located in HangZhou,HangZhou,ZheJiang , China,occupy an area of more than 40,000 sqm and employ over 200 skilled workers,maximum capacity of 50 containers per month. Our factory has the BSCI and ISO 9001 / ISO14001 / ISO 45001 certification.

We have modern equipment including advanced CNC auto-cutting,automatic bending,robot welding machine,automatic powder-coated line. We have our own cushion production workshop,to supply not only the products but also the accessories like cushion by ourselves.

Our products range includes various type of outdoor furniture with Aluminum,PE rattan,textilener, plastic-wood,rope,upholstery outdoor fabric/blended fabric etc. We export our products to the US ,Europe, Oceania and middle east countries.

Our showroom around 2800 square CHINAMFG space with more than 100 hundreds items furniture. We have our own designer and R&D department,exhibit 20 to 30 models new furniture per year with new material and new technology application.

Share your requirement with us to learn more.

CHINAMFG

Click here to make an oppointment with us when you visit in China.

Our Customers

Click here,We look CHINAMFG to building a long term relationship with you.

Certifications

Click here to learn more.

FAQ

FAQ
Q1: Are you manufacturer or trading company?
A: We are manufacturer specialized in outdoor furniture since 2011 in HangZhou City ZheJiang Province China.

Q2: What kinds of certificate do you have?
A: We have BSCI / ISO90001 / ISO14001 / ISO 45001 and many other certificate from international quality management system.

Q3:What is your MOQ?

A:Normally,the MOQ is a 40HQ container.It is acceptable to mix loading with 2-3 models in a container.Besides,we can accept smaller order quantity.But it will increase the production cost and the price will be higher.

Q4: How long is your delivery time?
A: It depends on your order quantity and time of season.Normally it is 35-50days.

Q5:Can I customize my logo or redesign the products?
A:Yes,we can customize the logo and design as your requirements.

Q6:Why should I choose your factory outdoor products?
A:1.Reliable – Majority of the customers have been working together with factory for over 10years

Quality Control: – There are in-house testing equipment and individual QC stations from raw material receiving to finished products.The complete quality control process provides high quality guarantee.
Factory Direct – Reducing our overall cost and delivering the highest value.

Q7:Could you offer customize service?
A: Yes,we can.
We are capable of tailor the products according to your personal requirements.

Q8:What kind of payment your company accept for orders?
A:The regular payment term is TT in advance (30% deposit ,70% balance against copy of B/L).Or any other payment term can also be negotiated.

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

editor by lmc 2024-10-21

China Custom Yh-2000p CHINAMFG Patio Chair Outdoor Furniture PE Rattan Wicker Garden Dining Set vacuum pump ac system

Product Description

Company Profile

HangZhou YiYuan Industrial Co.,LTD is a wholly-owned subsidiary of Hong Kong Yuan Home. With nearly 20 years of experience in furniture, YiYuan Industrial has possessed extraordinary quality and excellent cost performance, inspired consumers to freely express their creativity, and become a loyal partner of thousands of customers around the world. We will, as always, lead consumers to enjoy the wonderful furniture styles and experience the ultra-cost-effective leisure lifestyle. Adhering to the founder’s manufacturing concept of benefiting thousands of customers, and the unremitting pursuit of nearly 20 years, we always insist on providing consumers with stylish design, rich choices, outstanding quality and professional service.

Advantages and disadvantages of outdoor tables and chairs

Advantages:

Natural environmental protection, natural rattan furniture hand-woven, no industrial pollution, add natural atmosphere, and courtyard atmosphere match.

Easy to take care of, because most of the outdoor are environmentally friendly imitation rattan materials, no special maintenance, usually can be directly washed with water, especially convenient.

Improve the living environment, improve the quality of life, reflect the owner’s taste of life, has the advantages of moulding temperament.

Disadvantages:

Single shape. Because it is a handicraft product, it is difficult to make complex styles, and the shape will be relatively simple.

Available colors:

Dining Set Display:

Product Descriptions

Project Cases

Loading & Shippment:

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

How do I secure my garden furniture to prevent it from tipping over during windy weather?

Securing your garden furniture is important to prevent it from tipping over during windy weather. Here are some methods you can use to secure your furniture:

1. Weighted Bases or Sandbags:

For lightweight furniture such as chairs or small tables, consider using weighted bases or sandbags. These can be placed on the furniture’s legs or base to provide additional stability and prevent tipping. Make sure the weights are securely attached or positioned to avoid any accidents.

2. Anchoring Systems:

For larger furniture pieces or items that are prone to tipping, using anchoring systems can be highly effective. Anchoring kits are available in hardware stores and typically include straps, cables, or brackets that can be attached to the furniture and secured to the ground or a sturdy structure like a wall or deck.

3. Staking or Ground Pegs:

If your garden furniture has legs or supports that can be inserted into the ground, consider using stakes or ground pegs. These can be driven into the soil to provide additional stability and prevent tipping. Ensure that the stakes or pegs are securely anchored and properly inserted into the ground.

4. Windproof Umbrellas and Canopies:

If you have umbrellas or canopies as part of your garden furniture, choose windproof options that are designed to withstand gusty conditions. These typically have sturdy frames, reinforced joints, and vented canopies that allow wind to pass through, reducing the risk of tipping.

5. Storage or Temporary Removal:

During severe or stormy weather, consider storing your garden furniture in a secure, covered area or temporarily removing it from exposed areas. This can prevent damage caused by strong winds and ensure the safety of both the furniture and your surroundings.

6. Regular Inspections:

Regularly inspect your garden furniture for any signs of wear, damage, or loose components. Tighten screws, bolts, or joints as necessary to maintain stability. Replace any damaged parts or repair weak areas promptly to prevent tipping accidents.

7. Positioning and Layout:

When arranging your garden furniture, consider the layout and positioning to minimize the impact of wind. Place taller or heavier furniture pieces against walls or other sturdy structures to provide additional support. Avoid positioning furniture in open, exposed areas where wind gusts are more likely.

8. Weather Alerts and Precautions:

Stay informed about weather conditions in your area and take necessary precautions when severe weather is expected. Bring in or secure your garden furniture well in advance to prevent damage caused by strong winds or storms.

By implementing these measures, you can help secure your garden furniture and minimize the risk of tipping over during windy weather. Remember to assess the specific needs of your furniture and adjust the methods accordingly for optimal stability and safety.

oudoor furniture

How can I make my garden furniture more comfortable for extended use?

To make your garden furniture more comfortable for extended use, you can consider the following tips and techniques:

1. Cushions and Pillows:

Add cushions and pillows to your garden furniture to provide extra padding and support. Look for cushions made from outdoor-grade materials that are resistant to moisture, fading, and mildew. Opt for pillows with soft and durable fabrics that enhance comfort. Make sure to choose cushions and pillows that fit the size and style of your furniture.

2. Ergonomic Design:

Consider the ergonomic design of your garden furniture to promote comfort during extended use. Look for chairs with proper back support and armrests that allow for relaxed seating positions. Tables with an appropriate height can also contribute to a more comfortable dining experience. Ergonomic design ensures that your body is properly supported and aligned, reducing discomfort and fatigue.

3. Adjustable Furniture:

If possible, opt for garden furniture with adjustable features. Adjustable chairs or loungers allow you to customize the seating position according to your preference. Being able to adjust the backrest or footrest can significantly enhance comfort during extended periods of use.

4. Shade and Sun Protection:

Provide shade and sun protection to make your garden furniture more comfortable, especially during hot and sunny days. Consider adding umbrellas, canopies, or pergolas to create shaded areas. This helps to reduce direct sun exposure and keeps the seating area cooler and more enjoyable.

5. Proper Ventilation:

Ensure proper ventilation around your garden furniture. Good airflow helps to prevent sweat buildup and keeps you cool. If your furniture has cushions, choose materials that are breathable and allow air to circulate. Mesh or ventilated designs can help with airflow and moisture management.

6. Protective Covers:

Use protective covers when your garden furniture is not in use to keep it clean and protected. Covers can help prevent dust, dirt, and bird droppings from accumulating on the furniture. Clean furniture is generally more comfortable to use for extended periods.

7. Outdoor Rugs and Mats:

Add outdoor rugs or mats to create a more inviting and comfortable seating area. These can provide a softer surface for your feet and also help define the space. Look for rugs or mats that are specifically designed for outdoor use and are resistant to moisture and fading.

8. Proper Maintenance:

Regularly clean and maintain your garden furniture to keep it in good condition. Follow the manufacturer’s instructions for cleaning and care. Tighten any loose screws or bolts, and replace any worn-out parts. Well-maintained furniture not only looks better but also tends to be more comfortable and enjoyable to use.

By implementing these tips, you can enhance the comfort of your garden furniture and create a more inviting outdoor space for extended use. Remember to consider your personal preferences and the specific needs of your furniture when making adjustments or additions.

oudoor furniture

Can you recommend affordable garden furniture options for a tight budget?

If you have a tight budget but still want to furnish your garden with affordable options, there are several choices available. Here are some recommendations for affordable garden furniture:

1. Plastic Furniture:

Plastic furniture is often more budget-friendly compared to other materials. It is lightweight, easy to clean, and resistant to weather conditions. Look for plastic chairs, tables, and loungers that are designed for outdoor use.

2. Folding Furniture:

Folding furniture is a practical and cost-effective option for outdoor spaces. These pieces are versatile and can be easily folded and stored when not in use. Folding chairs, tables, and benches are available at affordable prices and can provide seating and dining options for your garden.

3. Wooden Furniture:

Wooden furniture can be more affordable than other materials, especially if you choose softwood options like pine or spruce. While these may require more maintenance and may not be as durable as hardwoods, they can still provide a natural and budget-friendly option for your garden.

4. DIY and Upcycled Furniture:

If you’re feeling creative, consider DIY (Do-It-Yourself) or upcycled furniture projects. You can repurpose old furniture or materials to create unique and affordable pieces for your garden. Look for tutorials and inspiration online to get started.

5. Secondhand or Thrifted Furniture:

Check out local thrift stores, yard sales, or online marketplaces for secondhand garden furniture. You may find pre-owned pieces in good condition at significantly lower prices. With some cleaning and minor repairs, you can have affordable and functional furniture for your garden.

6. Sales and Clearance:

Keep an eye out for sales and clearance events at furniture stores or online retailers. These often offer discounted prices on outdoor furniture, allowing you to find affordable options within your budget.

7. Rent or Borrow:

If you only need furniture for a short period or for occasional use, consider renting or borrowing from friends or family. This can be a cost-effective solution that allows you to enjoy outdoor furniture without making a long-term investment.

Remember, while affordable options may have some trade-offs in terms of durability or style, with proper care and maintenance, they can still provide functional and enjoyable outdoor seating and dining areas on a tight budget.

editor by lmc 2024-10-21

China Custom Lightweight Portable CHINAMFG Folding Picnic Table vacuum pump oil near me

Product Description

Lightweight Portable CHINAMFG Folding Camping Table for Picnic, BBQ grill

Table size: 90.5x52x70.5/45cm
Folded size: 90x15x12cm
Carrying bag: 210D oxford bag

Portal folding table designed with telescoping aluminum legs for different heights starting at 17.7″ to 27.8″ to fit uneven surfaces and meet the demands for your next camping adventure

The aluminum slat table top can be rolled up. Legs are foldable with non-skid feet. Included carry bag makes the table extremely compact for easy storage and transportation

Assembly can be finished in 1 minute. The strength and stability will exceed your expectations. Perfect for camping tailgating or backyard use

Unfolded Size	90.5x52x70.5cm
Folded size	90x15x12cm
Height adjustable	from 45cm to 70.5cm
N..W per pc	4.2kgs
Max. Loading weight	80kgs
Color	Customized, can do Pantone No as your request
Logo	Any color is avaiable
Packing	1pc per Carrying bag + mail box

Detailed Photos

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

Can I customize aluminum tables to match my outdoor design preferences?

Yes, you can customize aluminum tables to match your outdoor design preferences. Here is a detailed explanation:

1. Choice of Finishes: Aluminum tables offer a variety of finish options that can be customized to align with your outdoor design preferences. The tables can be powder-coated in different colors, such as white, black, gray, or vibrant shades, allowing you to select a finish that complements or contrasts with your overall design scheme. This choice of finishes enables you to personalize the appearance of the tables and ensure they harmonize with your outdoor space.

2. Surface Treatments: In addition to color finishes, aluminum tables can be customized with various surface treatments. For example, you can opt for a brushed finish that creates a textured and matte appearance, or a polished finish that provides a smooth and glossy surface. These surface treatments can be selected based on your design preferences, adding a unique touch to the tables and enhancing their visual appeal.

3. Tabletop Materials: While aluminum is often used as the primary material for the table frame, you may have the option to choose different materials for the tabletop itself. Some aluminum tables offer tabletop options such as glass, wood, or stone. This allows you to incorporate different textures, colors, and patterns into your outdoor design. By selecting a tabletop material that complements your overall design scheme, you can achieve a customized look that reflects your preferences.

4. Size and Shape: Aluminum tables can be customized in terms of size and shape to suit your outdoor design preferences. Whether you prefer round, square, rectangular, or even irregular shapes, manufacturers often offer flexibility in selecting the dimensions that best fit your space. Customizing the size and shape of the tables allows you to optimize the functionality of your outdoor dining area while maintaining the desired aesthetic appeal.

5. Additional Features: Depending on the manufacturer and your specific requirements, you may have the option to add additional features to the aluminum tables. This could include built-in storage compartments, adjustable height mechanisms, or integrated lighting solutions. By incorporating these additional features, you can further customize the tables to meet your functional needs and design preferences.

6. Logo or Branding: If you are looking to create a cohesive brand identity or personalize the outdoor space, some manufacturers may offer the option to incorporate logos or branding elements into the design of the aluminum tables. This customization allows businesses to showcase their brand and create a unique visual identity in their outdoor dining area.

7. Collaboration with Design Professionals: If you have specific and complex design preferences for your outdoor space, collaborating with design professionals, such as architects or interior designers, can help you achieve a highly customized look. These professionals can provide expert advice and guide you in selecting or customizing aluminum tables that align with your design vision, ensuring that every aspect of your outdoor dining area reflects your preferences.

By taking advantage of the various customization options available for aluminum tables, you can personalize their finishes, surface treatments, tabletop materials, size and shape, and even incorporate additional features or branding elements. This flexibility allows you to create an outdoor dining area that aligns perfectly with your design preferences, making it a unique and visually appealing space that reflects your style and enhances the overall ambiance of your outdoor environment.

oudoor furniture

Can aluminum tables be paired with specific chairs or seating options?

Yes, aluminum tables can be paired with specific chairs or seating options to create a cohesive and visually appealing outdoor dining or seating area. Here is a detailed explanation:

1. Aluminum Chairs: One of the most common and complementary options for pairing with aluminum tables is aluminum chairs. Aluminum chairs are designed to match the style and aesthetics of aluminum tables, creating a cohesive look in outdoor spaces. They often feature similar design elements, such as aluminum frames or powder-coated finishes, which help to maintain a consistent visual theme. Pairing aluminum tables with aluminum chairs ensures a harmonious and coordinated appearance, enhancing the overall ambiance of the outdoor area.

2. Mixed Materials: Aluminum tables can also be paired with chairs or seating options made from different materials to create an eclectic or contrasting design. For example, pairing aluminum tables with chairs made from wood, wicker, or rattan can create an interesting mix of materials and textures. This combination can add visual interest and create a unique and personalized outdoor space. When opting for mixed materials, it is important to consider the overall design scheme and ensure that the different elements harmonize with each other.

3. Cushioned Seating: To enhance comfort and add a touch of luxury to an outdoor dining area, aluminum tables can be paired with cushioned seating options. This can include chairs with padded seats and backs or outdoor cushions that can be added to the seating. Cushioned seating provides added support and comfort for extended periods of sitting, making it ideal for leisurely outdoor dining or relaxation. When selecting cushioned seating, it is important to choose materials that are weather-resistant and designed for outdoor use.

4. Bench Seating: Another option for pairing with aluminum tables is bench seating. Benches offer a versatile and space-efficient seating solution, especially for larger tables or communal dining areas. Aluminum tables can be accompanied by aluminum benches to maintain a consistent style, or they can be paired with benches made from other materials, such as wood or composite materials. Bench seating encourages social interaction and can create a casual and inviting atmosphere in outdoor settings.

5. Lounge Seating: For outdoor lounges or casual seating areas, aluminum tables can be paired with lounge chairs, outdoor sofas, or sectional seating. This combination provides a comfortable and relaxed seating arrangement, perfect for enjoying conversations, drinks, or casual meals. Lounge seating options can be chosen to match the design style of the aluminum tables or to create a contrasting aesthetic for added visual interest.

6. Bar Stools and Counter Height Chairs: In settings such as outdoor bars or bistro areas, aluminum tables can be paired with bar stools or counter height chairs. These taller seating options create a casual and social atmosphere and are designed to be used with tables at a higher height. Bar stools and counter height chairs made from aluminum or other materials can be selected to complement the design of the aluminum tables and create a cohesive look in these specific settings.

When pairing chairs or seating options with aluminum tables, it is important to consider factors such as comfort, durability, style, and the intended use of the outdoor space. By selecting seating options that complement the design of the aluminum tables and meet the specific requirements of the outdoor area, you can create a cohesive and inviting environment that enhances the overall dining or seating experience.

oudoor furniture

What are the advantages of lightweight aluminum tables for easy portability?

There are several advantages of lightweight aluminum tables when it comes to easy portability. Here is a detailed explanation:

1. Easy Transportation: The primary advantage of lightweight aluminum tables is that they are easy to transport. Due to their lightweight nature, these tables can be easily lifted, carried, or moved from one location to another without much effort. This makes them highly convenient for situations where frequent table relocation is required, such as outdoor events, picnics, camping trips, or trade shows.

2. Convenience: Lightweight aluminum tables offer a high level of convenience. Their lightness makes it effortless to set up or dismantle the tables, allowing for quick and hassle-free assembly and disassembly. This is particularly beneficial in scenarios where time is a factor, such as when organizing events, parties, or temporary gatherings.

3. Flexibility of Use: The lightweight nature of aluminum tables provides flexibility in their use. They can be easily moved and rearranged within indoor spaces or outdoor settings, allowing for convenient customization of the layout. This flexibility is advantageous when you need to adjust the table arrangement based on the number of guests, the activities taking place, or the available space.

4. Portability for Outdoor Activities: Lightweight aluminum tables are especially useful for outdoor activities. Whether you’re going on a picnic, camping trip, or beach outing, carrying a lightweight table is much more manageable than a heavier alternative. The portability of aluminum tables enables you to enjoy outdoor dining or have a convenient surface for various activities without being burdened by excessive weight.

5. Compact Storage: Another advantage of lightweight aluminum tables is their compactness when it comes to storage. These tables are often designed to be foldable or collapsible, allowing them to occupy minimal space when not in use. This is particularly beneficial in situations where storage space is limited, such as small apartments, RVs, or storage closets.

6. Accessibility: Lightweight aluminum tables are accessible to a wide range of individuals. Their lightness makes them easier to handle for people of different ages and physical abilities. This inclusivity allows everyone to participate in setting up or moving the tables, fostering a sense of independence and involvement.

7. Reduced Risk of Injury: The lightweight nature of aluminum tables contributes to a reduced risk of injury during handling and transportation. Compared to heavier tables made of materials like solid wood or wrought iron, aluminum tables are less likely to cause strain or accidents due to their lighter weight. This makes them a safer option, especially when there are multiple individuals involved in the setup or relocation process.

8. Lower Shipping Costs: Lightweight aluminum tables can also result in lower shipping costs when purchasing or transporting them over long distances. The reduced weight decreases the overall shipping weight, potentially leading to savings in shipping fees or making it more affordable to transport larger quantities of tables.

In summary, the advantages of lightweight aluminum tables for easy portability include easy transportation, convenience, flexibility of use, portability for outdoor activities, compact storage, accessibility, reduced risk of injury, and lower shipping costs. These advantages make lightweight aluminum tables a practical and user-friendly choice for a variety of settings, whether it’s for indoor use, outdoor events, or on-the-go activities.

editor by lmc 2024-10-21

China supplier Outdoor Camping CHINAMFG Oxford Cloth Folding Table Ci21501 with Best Sales

Product Description

HIGH STABILITYWithstands weights of up to 50.7 lbs, easy to hold glasses and bottles and things flat without wobble, sturdy to support heavy tasks such as cutting and cooking.
LIGHTWEIGHT AND PORTABILITYThe folding table is lightweight and compact to be packed in a car or RV, light enough to carry and easy to store into a free carry bag.
NO TOOLS NEEDED FOR INSTALLATIONThis Portable Camping Folding Table is made of aluminum and the connectors are bungee making the portable backpacking table assembled easily and quickly, easy to put together and put away in about a minute.
Multifunctional Folding TableOur folding CHINAMFG Table is so useful that you can use it for all types of outdoor/indoor activities, Backpacking, Hiking, fishing Picnic, Camp, Beach, Boat, Dining and Cooking with Burner.
DURABLE AND EASY TO CLEANLFGUD outdoor camping folding table top is made of aerospace-grade aluminum alloy that is super durable and easy to clean!

product/CFMatmiEIRTU/China-Outdoor-Folding-Picnic-Table-Pack-with-Carry-Bag-and-Bamboo-Desktop-Ai23534.html

Detailed Photos

Product Parameters

Weight: 3.3 lbs,

Size: 22.05 × 15.94 × 15.94 inches.(56×40.5×40.5 cm)

Support weight: 50.7 lbs (23kg)

Certifications

Company Profile

Our Advantages

After Sales Service

FAQ

/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

oudoor furniture

What are the benefits of using aluminum tables in commercial outdoor seating areas?

Using aluminum tables in commercial outdoor seating areas offers several benefits. Here is a detailed explanation:

1. Durability: Aluminum tables are highly durable and can withstand the rigors of commercial use in outdoor seating areas. They are resistant to corrosion, weather elements, UV rays, and general wear and tear. Aluminum’s strength and robustness make it suitable for high-traffic environments, ensuring that the tables can withstand frequent use without easily deteriorating or requiring constant maintenance.

2. Lightweight: Aluminum is a lightweight material compared to many other commonly used materials for tables, such as wood or steel. This makes aluminum tables easier to move, rearrange, or store when needed. The lightweight nature of aluminum also facilitates the setup and breakdown of outdoor seating areas, which may be required for events, parties, or seasonal changes.

3. Weather Resistance: Outdoor seating areas are exposed to various weather conditions, including rain, sunlight, humidity, and temperature fluctuations. Aluminum tables are designed to be weather-resistant, making them an ideal choice for commercial outdoor settings. They can withstand exposure to moisture without rusting or warping and resist fading or discoloration from prolonged sunlight exposure. This weather resistance ensures that the tables maintain their appearance and functionality over time.

4. Low Maintenance: Aluminum tables require minimal maintenance, which is advantageous in commercial settings where time and resources may be limited. Unlike materials like wood that may need regular staining or sealing, aluminum tables typically only require basic cleaning with mild soap and water. This low maintenance requirement saves time and effort, allowing staff to focus on other essential tasks.

5. Design Versatility: Aluminum tables offer design versatility, allowing for various styles and aesthetics to be achieved in commercial outdoor seating areas. They are available in a wide range of shapes, sizes, and finishes, including different colors, textures, and patterns. This versatility enables businesses to choose aluminum tables that complement their brand image, match the overall design theme of the establishment, or cater to specific customer preferences.

6. Cost-Effective: Aluminum tables can be a cost-effective choice for commercial outdoor seating areas. While the upfront cost may vary depending on the specific design, quality, and features of the tables, aluminum’s durability and longevity offer long-term value. Aluminum tables typically have a long lifespan and require minimal repair or replacement, resulting in potential cost savings over time compared to tables made from less durable materials.

7. Hygiene and Cleanliness: In commercial settings, maintaining hygiene and cleanliness is crucial. Aluminum tables are non-porous and easy to clean, reducing the risk of bacteria or dirt build-up. They can be quickly wiped down with a mild cleaning solution, ensuring a sanitary surface for customers. This quality is particularly important in foodservice establishments or outdoor seating areas where cleanliness is a priority.

8. Customization Options: Many manufacturers offer customization options for aluminum tables, allowing businesses to tailor the tables to their specific needs. Customization may include selecting the table size, shape, finish, or even incorporating branding elements such as logos or patterns. Customized aluminum tables can help create a unique and cohesive aesthetic that aligns with the establishment’s brand identity.

In summary, using aluminum tables in commercial outdoor seating areas provides several benefits, including durability, lightweight construction, weather resistance, low maintenance requirements, design versatility, cost-effectiveness, hygiene, and customization options. These advantages make aluminum tables a practical and reliable choice for businesses seeking durable and aesthetically pleasing outdoor furniture for their commercial spaces.

oudoor furniture

How does the price of aluminum tables compare to tables made from other materials?

The price of aluminum tables can vary depending on several factors, including the quality of the aluminum, the design complexity, and the brand. Here is a detailed explanation of how the price of aluminum tables compares to tables made from other materials:

1. Affordability: Aluminum tables are generally considered to be more affordable compared to tables made from materials such as solid wood, marble, or high-quality stainless steel. Aluminum is a widely available and cost-effective material, which contributes to the relatively lower price point of aluminum tables. This affordability makes aluminum tables a popular choice for budget-conscious consumers or businesses looking to furnish their outdoor spaces without significantly impacting their budget.

2. Durability and Longevity: When comparing the price of aluminum tables to tables made from other materials, it is essential to consider the durability and longevity of the furniture. Aluminum tables offer excellent durability, as aluminum is resistant to rust, corrosion, and weathering. They can withstand outdoor elements and require minimal maintenance. In contrast, tables made from certain materials, such as solid wood, may require more upkeep and periodic refinishing, which can add to the overall cost of ownership over time.

3. Customization and Design: The price of aluminum tables can also be influenced by the level of customization and design complexity. Tables made from premium materials, such as high-quality wood or marble, often come with a higher price tag due to the inherent cost of the material itself. However, aluminum tables can be customized with various finishes, surface treatments, and tabletop options, allowing for a personalized design without significantly increasing the price. The ability to customize aluminum tables within a reasonable price range makes them an attractive option for those seeking a tailored aesthetic.

4. Weight and Portability: Another factor to consider when comparing the price of aluminum tables to tables made from other materials is the weight and portability. Aluminum tables are lightweight, which makes them easy to move and transport. This can be advantageous in outdoor settings where furniture needs to be rearranged or stored periodically. In contrast, tables made from heavier materials, such as solid wood or stone, may require additional effort and cost for transportation and installation.

5. Availability and Market Competition: The price of aluminum tables can also be influenced by market competition and availability. Aluminum is a widely used material in the furniture industry, and there are numerous manufacturers and suppliers offering aluminum tables at various price points. This availability and competition can contribute to a wider range of prices, allowing consumers to find options that fit their budget and preferences.

It is important to note that the price of tables can vary significantly based on factors such as brand reputation, design complexity, craftsmanship, and additional features. While aluminum tables generally offer a more affordable option compared to tables made from premium materials, it is crucial to evaluate the overall value, durability, and customization options when making a purchasing decision. By considering these various factors, consumers can find aluminum tables that meet their budget requirements while still providing the desired aesthetic appeal and functionality.

oudoor furniture

How does the durability of aluminum tables compare to other materials?

When comparing the durability of aluminum tables to other materials commonly used for furniture, here is a detailed explanation:

1. Wood: Aluminum tables are generally more durable than tables made of wood. While wood can be sturdy and long-lasting, it is susceptible to issues such as warping, cracking, and rotting when exposed to moisture or fluctuating outdoor conditions. In contrast, aluminum is resistant to these problems and can withstand outdoor elements without deteriorating. Additionally, aluminum is less prone to scratches and stains compared to wood, making it a more durable choice in terms of everyday wear and tear.

2. Wrought Iron: Wrought iron tables are known for their strength and durability. They can withstand heavy use and resist damage from impacts or pressure. However, wrought iron is susceptible to rust and corrosion over time, especially when exposed to moisture or humid environments. In comparison, aluminum is highly resistant to rust and corrosion, making it a more durable material for outdoor tables. Aluminum’s durability also extends to its ability to maintain its structural integrity under various weather conditions without warping or bending.

3. Plastic: Aluminum tables are generally more durable than plastic tables. Plastic tables can be lightweight and affordable, but they are prone to cracking, fading, and discoloration when exposed to prolonged sunlight or extreme temperatures. Plastic can also become brittle over time, leading to reduced durability. On the other hand, aluminum is more resistant to fading, discoloration, and temperature variations, making it a more durable choice for outdoor use.

4. Glass: Aluminum tables tend to be more durable than glass tables. Glass tables can be elegant and visually appealing, but they are more susceptible to breakage and scratches. Glass is also sensitive to temperature changes, and extreme temperature variations can cause it to crack or shatter. In comparison, aluminum tables are less fragile and can withstand impacts better. Aluminum’s durability makes it a safer and more practical choice, especially in high-traffic areas or households with children or pets.

5. Composite Materials: Composite materials, such as fiber-reinforced polymer (FRP) or polywood, offer good durability but may not match the longevity of aluminum tables. While composite materials are designed to be weather-resistant and low-maintenance, they can still be susceptible to fading, warping, or cracking over time. Aluminum tables, with their resistance to rust, corrosion, and fading, can provide a higher level of durability in outdoor settings.

It’s important to note that the durability of any table can also depend on factors such as the quality of materials used, manufacturing techniques, and proper maintenance. However, overall, aluminum tables tend to offer superior durability compared to wood, wrought iron, plastic, glass, and some composite materials, making them a reliable choice for both indoor and outdoor use.

editor by lmc 2024-10-21